0755-89673076, 0755-89673457
I . Technical parameters Operating voltage: DC12V Operating current: 10MA Frequency available: Fixed frequency 315/433.92MHz (We can do customized frequency) Adjustable frequency:290MHz-480MHz Ambient temperature-20~ +50 ℃ Kelvin 4-Channel RF Wireless Remote Control Duplicator for Cars,
Garage Doors , Gates doors, Alarm systems etc. Fixed frequency
(433.92mhz or 315mhz) for copying 99.99% common fixed and learning
code remote controls. Face to face copy the functions of your original remote by this
4-channel RF remote control duplicator with code learning functions
and you'll always have a back up. Duplicate Your Existing Remote Controllers 1.Vehicle central locking systems 2.Garage doors 3.Electronic gates 4.Electrical appliances 5.Car sunroofs 6.Heating systems Easy to install and use, the 4 channel remote control system lets
you take control of your gadgets, car and home or garage. Works with the following remote control modules (please check your
existing remote control before ordering): Your remotes also should
be Fixed code or Learning code. 2260 2262 FP527 HT12DHT12EPT2240S026-1 S026-2 S026-3 S026-4
SMC918.... etc Please note this does not copy rolling code Methods of operation 1, Clear out code: To Clear up test stored rf signal memory from factory by pressing
the locking key(A) and unlock key(B) at the same time, two seconds
later, LED indicator light flashes three times, followed by a
continuous fast blinking. Indicates that the remote control codes
stored has been cleared out. 2, Duplicating (learning) Hands are holding remote control , and the other are holding the
duplicating remote control, 2 remote controls put together as close
as possible, while pressing the remote controls two match
button,(eg: A-A’,B-B’) three seconds later, LED indicator light
flashes three times, followed by a continuous fast blinking. This
indicates that this copy of the remote control buttons are same as
copied on the remote control button codes . Several other keys are
also according to the above approach to learning. 3, Recovery code If the code copied have been mistakenly removed the remote control,
you do not worry, the remote control can restore yourself. Method
is pressing (up-down eg: locking key and bell key) two buttons
(metal shell remote control on the left, the plastic shell remote
control on the right) at the same time ,3 seconds later, LED
indicator light flashes three times, followed by a continuous fast
blinking. This indicates that the original remote control codes
have been restored. The other way, you can delete all and relearn them again. |
See more products from this supplier.
Do you want to show products of your own company? Join FREE now!
